SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklift
Used Parts for Forklifts - Unavoidably, forklift components will eventually wear out and require replacing. The option of obtaining brand new parts could become pricey so one more idea is to purchase used parts. This can save much cash eventually. It is a good idea to obtain used lift truck components that have been remanufactured. These parts will guarantee that you are getting components which will work for a long time and be productive.
Worn or broken parts that are remanufactured are a very cost effective answer as opposed to rebuilding. With rebuilding components, just the parts which are worn out or broken get changed, which means that other wearable components may break down soon after acquisition.
Remanufactured components are cleaned after being taken apart and have the unusable parts replaced. This method could provide the best assurance for second-hand components. All wearable components are replaced regardless of age or wear which is one more rationale why remanufactured parts in general run so much better. Whichever component within the part is brand new and this provides far longer life to the used part. Based on the forklift components which are being redone, the cleaning process and the complete remanufacturing process will vary.
The engines are cleaned after a complete disassembly. Different engine parts like for example pistons, spark plugs, rings, valve springs, filters, and valves can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to ensure that there are no oil pressure problems, no leaks, noises or any vacuum.
Transmissions are one more item that is oven cleaned after being disassembled. The transmission is then washed. A complete inspection is done in order to check for any cracks. Bearings, bushings and seals are all replaced. Normally, the replacement components used on transmission components meet OEM specifications.
Some components such as the water pump, torque converters, the alternator, the starter and steer axles can get longer serviceability after being reproduced and having all wearable parts replaced. The electronic control in the electric forklift is maintained by the control card. This card can likewise be remanufactured with replacing all aged and worn out parts. Unlike several lift truck parts the control card can only have the worn and aged components replaced.
Parts that are remanufactured have to be thoroughly checked upon reassembly to ensure they are in good condition prior to being sold. When buying these parts, it is a good idea to make sure that they have undergone all of the proper testing and inspections. On certain larger components such as steer axles, engines and transmissions, OEM specification replacement components should be used.
The dealer of used lift trucks and parts can ensure that the remanufactured parts have met OEM specifications and that these components meet industry standards. Lots of details go into remanufacturing second-hand components. This attention to detail offers more serviceability out of remanufactured parts compared to the parts that were merely rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LOCAL: 951-208-7239
12625 Frederick St I5-281
Moreno Valley, California
forkliftpartsmorenovalley.com
Email Us
About Us